EMI
RFI Noise Filter
This
EMI Filter kit is designed to filter out contamination
in the Mains. A Common Mode Choke with it's associated
capacitors form a low pass network, filtering out
RF in the process.
Due
to the 1.3A limitation of the choke, this EMI Filter
is recommended for preamp or signal outboards like
electronic crossovers only. Do not use it for power
amplifiers.
For
safety reasons, C1 is Type X while C2 and C3 are Type
Y.
Please
note that this kit operates at dangerous Live Mains
Voltages.
EMI Filter Schematic
|
PCB
= 2.4" X 1.5" (61mm x 38mm)
Double Sided | FR4
|