Pro Drivers – Matching Horns with Compression Drivers

RADIAN 8" COAX
My Favorite Horns + Drivers
B&C ME10 + Selenium D220Ti  –  Flat Response from 1.5kHz to 10kHz
Dayton H07E + PRV D280Ti  –  Flat Response from  2kHz to 8kHz. Linear roll-off. Lowest Xover = 1.7kHz
Dayton H07E + Pyle PDS442  –  Frequency Response, Waterfall plot, Toneburst Energy Storage, Spectrogram & Harmonic Distortion
Dayton H812 + Selenium D220Ti  –  Very Flat Response  from 1.5kHz to 10kHz. Linear roll-off. Lowest Xover = 800Hz

FaitalPRO STH100 + Radian 450PB  –  Flat Response from 2kHz to 8kHz. Linear roll-off. Lowest Xover = 1.5kHz
FaitalPRO STH100 + Selenium D220Ti  –  Flat Response from 2kHz to 10kHz. Linear roll-off. Lowest Xover = 1.5kHz
JBL 2342 + JBL 2425 – Flat Response from 1.2kHz to 10kHz. Used in Blackbird-TA.
Pyle PH810 + PRV D280Ti    Flat Response from 2kHz to 15kHz. Lowest Xover = 2kHz
Selenium HC23-25 + Dayton D250P
SEOS-12 + Selenium D220Ti  –  Flat Response from 1kHz to 10kHz
Compression DriversHorns Compatibility
B&C DE250
Dayton D250P
Peavey RX14

Peerless DFM-2535R00-08
PRV Audio D280Ti
Pyle PDB512
Pyle PDS182
Pyle PDS221
Pyle PDS382
Pyle PDS442
Radian 450PB
Radian 465PB
Selenium D220Ti
Tested with:
B&C ME10
Dayton H07E, H10RW, H812
DiySoundGroup SEOS-8, SEOS-12
FaitalPro STH100
PRV WG11-25
Pyle PH565, PH612, PH715, PH810
Selenium HL14-25, HC23-25
Horns + Drivers
Summary
Dayton H07E + Pyle PDS382 (2013)Used in Nightingale-II
Dayton H07E + Pyle PDS442 (2018)Tested with MCM 55-2960  Dayton PA200  Dayton DA270  Silver Flute W20RC38-08
Vifa M25WO49-08
Pyle PH12s + Peavey RX14 (2011)
Pyle PH565 + Selenium D220Ti
Best Match
+/- 5dB Response from 2kHz to 10kHz. Lowest Xover = 1.5kHz
Suitable for 8-10inch woofers
Pyle PH565 + Dayton D250P
+/- 5dB Response from 2.5kHz to 10kHz. Lowest Xover = 1.5kHz
Pyle PH565 + PRV D280Ti
+/- 4dB Response from 2kHz to 15kHz. Lowest Xover = 2kHz
Pyle PH565 + Peavey RX14
+/- 5dB Response from 2kHz to 20kHz. Lowest Xover = 2kHz
Pyle PH565 + Pyle PDS182
+/- 5dB Response from 2kHz to 10kHz. Lowest Xover = 2kHz
Pyle PH565 + Pyle PDS221 (2011)
Pyle PH612 + Pyle PDS382Frequency Response with various filters
Pyle PH612 + Selenium D220Ti
+/- 5dB Response from 2kHz to 10kHz. Lowest Xover = 2kHz
Suitable for 12 inch woofers
Pyle PH715 + Selenium D220Ti (2013)Used in Nightingale-III
Pyle PH810 Driver Compatibility
Renkus Heinz Horn + Pyle PDB512 (2011)
Selenium HC23-25 + Pyle PDB512
+/- 3dB Response from 2kHz to 7kHz. Lowest Xover = 2.5kHz
Suitable for 8-10 inch woofers
Selenium HC23-25 + Selenium D220Ti
+/- 5dB Response from 1.5kHz to 10kHz. Lowest Xover = 2kHz
 Reviews 
Dayton D250P Compression Driver
Tested with Dayton H812 horn
MidRange
Dayton PK165-8 6″ Kevlar/Paper Cone
T/S Parameters with Box Modeling 
Woofers
Altec Lansing CD912-8A CoaxialT/S Parameters with Box Modeling 
BBC MTG 1132T/S Parameters with Box Modeling
Dayton PA200-8 8″ WooferTested with Pyle PDS442 / Dayton H07E
Dayton PA310-8 12″ Woofer
T/S Parameters with Box Modeling
FaitalPro 10FE200-4 10″ Woofer
T/S Parameters with Box Modeling
MCM 55-2960 Die Cast 8″ WooferTested with Fountek FE85  Tested with Pyle PDS442 / Dayton H07E
MCM 55-2981 Die Cast 10″ WooferT/S Parameters with Box Modeling
MCM 55-2982 Die Cast 12″ WooferT/S Parameters with Box Modeling
Peerless FSL-1020R02-08 10″ WooferT/S Parameters with Box Modeling
Radian 212-8T/S Parameters with Box Modeling